Thank you!
We will contact you shortly
Natural stone veneer combines a genuine stone surface with a thin, lightweight and flexible format, making it easy to cut, shape and install on a wide range of architectural surfaces.This installation guide covers surface preparation, adhesive selection, cutting, bonding, joints and finishing techniques for interior and exterior applications.
Before installation, lay out the stone veneer sheets on a clean, flat surface. Compare colours, veins and natural patterns, then arrange the sheets for a balanced appearance across the finished wall.
Check the direction of the stone texture, plan joints and edges, and number the sheets in installation order before cutting or applying adhesive.
Before installation, ensure the surface is clean, dry and free from dust, with primer applied where required. Follow the main installation steps, from cutting and adhesive application to positioning and bonding the stone veneer sheets.
01 — Cutting & Sizing
02 — PU Adhesive Application
03 — Positioning & Bonding
For interior installation, PU construction adhesives are used on concrete, cement and masonry surfaces. PU adhesives or MaxBond can be used on plywood, MDF and HMR boards.
For exterior walls and facades, polyurethane construction sealants such as 3M™ Polyurethane Construction Sealant 525 can be considered for bonding applications. Adhesive compatibility must be verified with the stone veneer backing, substrate and outdoor exposure conditions.
Watch the installation process, including adhesive application, positioning and bonding of natural stone veneer sheets. The video demonstrates practical installation techniques and tools used for stone veneer applications.
Video by "Decor Slim Stone". Demonstrates one of the installation methods.